3 Legged Thing Leo 2.0 Bronze with Airhead Pro Kit
Key Features
- Arca-type ball head and carbon-fiber tripod with 3/8"-16 mount
- Tripod features three detachable legs and removable center column
- With ball head, each leg can be configured as a monopod with up to a 43.4" height or can be combined with the center column to form a monopod with up to 59.2" height
- Tripod configuration with ball head supports up to 66.0 lb
- Push-and-pull center column for rapid camera, lens, or sport optic positioning
- Center column D-ring to accommodate ballast for additional stability
- Can be set for a minimum height of 21.7" or 8.2" without the center column
- With ball head, all three legs can be extended in the tripod configuration to obtain a maximum height of 44.1" or 57.7" with the center column fully raised
- Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them
- Legs each feature 5 sections with twist locks for rapid deployment and can be independently spread
- Legs can be locked at 22, 55, or 80° angles
- Rubber feet help to enhance stability on a wide variety of surfaces
- Weighs 4.1 lb and measures 14.7" when all three legs are reversed 180° and folded
- Rubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil
- Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod
- 3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws
- Ball head microfiber bag
- Tripod kit carry bag with strap for storage and transport
- Arca-type ball head with 88 lb load capacity
- Compatible with tripods or support systems that feature a 3/8"-16 mount
- Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
- Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
- Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
- Secondary locking knob with knurled surface allows head to rotate 360°
- Integrated clamp on top of on the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate
- Push-and-pull cam lock lever to secure compatible Arca-type quick release plates within the integrated clamp
- When opened, cam lock lever can be rotated and flipped over so that when used to lock the clamp, the direction of the lever's motion best suits either a right or left-handed user
- Built-in bubble level along the edge of the clamp opposite the cam lock lever accommodates landscape orientations
- Durable magnesium alloy construction
Offered here in bronze and blue, the Leo 2.0 Tripod with AirHed Pro Lever Ball Head from 3 Legged Thing provides a dynamic support system that features three detachable legs and a removable center column. Together, the tripod and ball head form a support system that features three detachable legs and a removable center column. With the ball head, each leg can be configured as a monopod with up to a 43.4" height or can be combined with the center column to form a monopod with up to 59.2" in height.