3 Legged Thing Winston 2.0 Bronze Tripod Kit
Key Features
- Arca-type ball head and carbon-fiber tripod with 3/8"-16 mount
- Tripod features three detachable legs and removable center column
- With ball head, each leg can be configured as a monopod with up to a 60.3" height or can be combined with the center column to form a monopod with up to 79.0" height
- Tripod configuration with ball head, supports up to 88.0 lb
- Push-and-pull center column with for rapid camera, lens, or sport optic positioning
- Center column D-ring to accommodate ballast for additional stability
- Can be set for a minimum height of 26.0" or 9.1" without the center column
- With ball head, all three legs can be extended in the tripod configuration to obtain a maximum height of 59.0" or 76.4" with the center column fully raised
- Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them
- Legs each feature 3 sections with twist locks for rapid deployment and can be independently spread
- Legs can be locked at 23, 55, or 80° angles
- Rubber feet help to enhance stability on a wide variety of surfaces
- Weighs 4.5 lb and measures 24.0" when all three legs are reversed 180° and folded
- Rubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil
- Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod
- 3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws
- Ball head microfiber bag
- Tripod kit carry bag with strap for storage and transport
- Arca-type ball head with 88 lb load capacity
- Compatible with tripods or support systems that feature a 3/8"-16 mount
- Uses ball-and-socket joint to help maximize pan-and-tilt flexibility
- Ball-and-socket joint provides 360° of swivel control, is tiltable down to a 90° angle, and can be locked into place
- Large primary locking knob with knurled surface allows ball-and-socket joint to be quickly swiveled, angled, fully tilted, or returned to its upright position
- Secondary locking knob with knurled surface allows head to rotate 360°
- Integrated clamp on top of on the ball-and-socket joint is compatible with included QR-OCTA Quick Release Plate
- Knurled locking knob for integrated clamp secures compatible Arca-type quick release plates
- Built-in bubble level along the edge of the clamp opposite the clamp's locking knob accommodates landscape orientations
- Durable magnesium alloy construction
This bronze and blue 3 Legged Thing Tripod Kit includes a bronze Winston 2.0 Tripod and blue AirHed Pro Ball Head. Together, the tripod and ball head form a support system that features three detachable legs and a removable center column. With the ball head, each leg can be configured as a monopod with up to a 60.3" height or can be combined with the center column to form a monopod with up to 79.0" in height.